Testing Products for ASTM D751
APP-D751A multi-test standard for coated materials like tarps, rainwear, and inflatable boats. This configuration focuses on the Newton-Series control architecture to ensure high-fidelity data acquisition. Utilizing a 32-bit digital signal processor, the system provides a superior Signal-to-Noise Ratio (SNR), which is essential for capturing precise material transitions that lower-resolution systems often miss.
The load frame for this application has been selected to provide the most cost-effective solution capable of meeting the standard’s peak force requirements. While TestResources offers a wide range of frame geometries, this specific selection represents the optimal balance between laboratory CAPEX and technical compliance. Any frame in our catalog meeting the minimum load rating will adhere to the standard; however, this configuration is our primary recommendation for those seeking a reliable, streamlined testing platform without unnecessary complexity.=
Burst Pressure: This often uses a Ball Burst fixture (a 1″ steel ball pushed through the fabric).
Use a High-Capacity Compression Cell for the ball burst test, even if the material feels soft.
Regulatory & Test Details
| App Id | APP-D751 |
|---|---|
| App Standard | ASTM D751 |
| Standard Organization | ASTM |
| Test Type | Multiple |
| Material Type | Coated Fabric |
| Specimen Type | Variable |
| Industry Type | Outdoor Gear |
| Min Force Kn | 10 |
| Max Force Kn | 100 |
| Max Spd Mm/m | 300 |
| Expert Spd | Standard for industrial fabrics. |
| Pointer App Software | N-ASTM-D751 |
| Pointer Fixture Family | G-ASTM-D751 |
| Pointer Strain Family | E-ASTM-D751 |
Implementation Commentary
Measures how well the coating (PVC/TPU) sticks to the fabric under extreme stress.
Common Pitfalls
Over-tightening the circular clamp, which pre-stresses the fabric before the ball touches it.