ANSI A118.1 Test Fixtures & Test Systems Model: G-ANSI-A118-1
Maintain salt solution pH between 6.5 and 7.2 to prevent skewed galvanic corrosion rates during the 534-hour soak.
Type: Standards
Family ID: G534
Technical Specifications
| Specification | Value |
|---|---|
| Test Type | Standards |
| Industry Standard | ANSI A118.1 |
| Interface Description | Optimized for TestResources Load Frames; universal adapters available for legacy systems. |
Interface & Compatibility
Optimized for TestResources Load Frames; universal adapters available for legacy systems.
Expert Commentary
Specimen Spacing: Never crowd the salt spray chamber. Specimens must be at least 30mm apart. If they are too close, shielding occurs, preventing the corrosive fog from reaching all surfaces equally and resulting in a non-conservative pass for the fastener coating.