You are here: Home / Testing Equipments

Testing Equipment

Browse our full catalogue of industrial testing equipment. Use the filters to narrow results by test type, sample standard, or force capacity.

627 items found

  • G375-5-P

    Tension
    • 1.3 kN
    • Tensile Grip

    Micro-Capstan: Specifically for fine wire and medical sutures where a full capstan wrap is needed to prevent jaw-breaks.

  • G4-48-GT-AF50

    Tension
    • 200 kN
    • Tensile Grip

    Shoulder Specialist: These grips eliminate clamping altogether; the specimen head sits in a socket, ensuring perfectly axial tension on metal…

  • G4-48-GT-AF60

    Tension
    • 250 kN
    • Tensile Grip

    Shoulder Specialist: These grips eliminate clamping altogether; the specimen head sits in a socket, ensuring perfectly axial tension on metal…

  • G42-A-B-C

    Compression
    • 20 kN
    • Compression Probe
    • 58 HRC, Hardened Steel

    Custom Probe Master: Configurable tip, diameter, and length.

  • G42-K10-40-Af159-L80

    Compression
    • 20 kN
    • Compression Probe
    • 58 HRC, Hardened Steel

    Flat-End Probe: 10mm diameter flat face, 80mm length.

  • G42-R2.5-40-Af159-L80

    Compression
    • 20 kN
    • Compression Probe
    • 58 HRC, Hardened Steel

    Hemispherical Probe: 5mm diameter (R2.5) round tip.

  • G42-R5-40-Af159-L80

    Compression
    • 20 kN
    • Compression Probe
    • 58 HRC, Hardened Steel

    Large Radius Probe: 10mm diameter (R5) round tip.

  • G4220-D150-F20-T280

    Compression
    • 20 kN
    • Hot Compression Platen
    • 58 HRC, Hardened Steel

    High-Temp Specialist: 150mm face rated for 280°C.

  • G43-A-AF159

    Tension
    • 20 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G466-H1-AF159

    Tension
    • 0.7 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G466-H1-K-AF159

    Tension
    • 0.7 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G466-H1-M4

    Tension
    • 0.5 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G466C-BG

    Tension
    • 0.7 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G466C-BP

    Tension
    • 0.7 kN
    • Tensile Grip

    Adhesion Master: Used for dollie pull-off tests; the nugget is the self-aligning head that compensates for slightly crooked glue-ups.

  • G470-BP

    Tension
    • 2 kN
    • Tensile Grip

    Pincher Action: Specifically for pulling small wires or connectors out of terminal blocks and circuit boards.

  • G501P

    Tension
    • 1 kN
    • Tensile Grip

    Pincher Action: Specifically for pulling small wires or connectors out of terminal blocks and circuit boards.

  • G565-60-EKX

    Tension
    • 300 kN
    • Tensile Grip

    Heavy Duty Wedge: The 100kN and 150kN models are the industrial standard for structural steel and rebar testing.

  • G565-60-EMX

    Tension
    • 300 kN
    • Tensile Grip

    Heavy Duty Wedge: The 100kN and 150kN models are the industrial standard for structural steel and rebar testing.

  • G565-60-GT-EXRY

    Tension
    • 300 kN
    • Tensile Grip

    Heavy Duty Wedge: The 100kN and 150kN models are the industrial standard for structural steel and rebar testing.

  • G56G-2P

    Tension
    • 1.3 kN
    • Tensile Grip

    General Purpose Screw: The most common all-arounder grip for general tensile testing of plastics and light metals.