Testing Products for ASTM D6484
APP-D6484The compression version of D5766 (testing a plate with a hole). This configuration focuses on the Newton-Series control architecture to ensure high-fidelity data acquisition. Utilizing a 32-bit digital signal processor, the system provides a superior Signal-to-Noise Ratio (SNR), which is essential for capturing precise material transitions that lower-resolution systems often miss.
The load frame for this application has been selected to provide the most cost-effective solution capable of meeting the standard’s peak force requirements. While TestResources offers a wide range of frame geometries, this specific selection represents the optimal balance between laboratory CAPEX and technical compliance. Any frame in our catalog meeting the minimum load rating will adhere to the standard; however, this configuration is our primary recommendation for those seeking a reliable, streamlined testing platform without unnecessary complexity.=
Compression After Impact: Tests how much a hole (damage) reduces the crushing strength of a wing panel.
Use a side-support Anti-Buckling fixture to keep the thin composite plate from bowing outward.
Regulatory & Test Details
| App Id | APP-D6484 |
|---|---|
| App Standard | ASTM D6484 |
| Standard Organization | ASTM |
| Test Type | Tension |
| Material Type | Plastics |
| Specimen Type | Dogbone |
| Industry Type | Aerospace / Composites |
| Min Force Kn | 100 |
| Max Force Kn | 1 |
| Max Spd Mm/m | 2 |
| Expert Spd | Open-hole compression is highly sensitive to edge effects. A slow rate ensures the stress concentration around the hole develops realistically. |
| Pointer App Software | N-ASTM-D6484 |
| Pointer Fixture Family | G-ASTM-D6484 |
| Pointer Strain Family | E-ASTM-D6484 |
Implementation Commentary
This is one of the hardest tests to perform; the fixture often weighs more than the specimen.
Common Pitfalls
Failing to torque the fixture bolts to the exact specification, leading to parasitic friction errors.