Testing Accessories

Browse our full catalogue of industrial testing accessories. Use the filters to narrow results by test type, sample standard, or force capacity.

138 items found

Newton Applications Software : N-ASTM-D3410
Compression
- Newton Applications Software
Analysis: Compressive Strength and Modulus. DAQ: Biaxial strain at 100Hz.
Newton Applications Software : N-ASTM-D3574
Multi
- Newton Applications Software
Analysis: IFD (Indentation Force Deflection). DAQ: High-res position for thickness measurement.
Newton Applications Software : N-ASTM-D3846
Shear
- Newton Applications Software
Analysis: In-plane shear strength of reinforced plastics. DAQ: 50Hz.
Newton Applications Software : N-ASTM-D412
Tensile
- Newton Applications Software
Analysis: Tensile Stress at given % elongation (Modulus). DAQ: 100Hz.
Newton Applications Software : N-ASTM-D4533
Tear
- Newton Applications Software
Analysis: Trapezoid Tear Strength (Heavy Duty). DAQ: High-load peak capture.
Newton Applications Software : N-ASTM-D5034
Tensile
- Newton Applications Software
Analysis: Breaking Force (Grab Method). DAQ: 50Hz.
Newton Applications Software : N-ASTM-D5035
Tensile
- Newton Applications Software
Analysis: Breaking Force and Elongation (Strip Method). DAQ: 50Hz.
Newton Applications Software : N-ASTM-D5169
Shear
- Newton Applications Software
Analysis: Shear Strength (Hook & Loop). DAQ: 50Hz. Calculation of average load over the middle 50% of travel.
Newton Applications Software : N-ASTM-D5733
Tear
- Newton Applications Software
Analysis: Trapezoid Tear Strength. DAQ: Median of the five highest peaks.
Newton Applications Software : N-ASTM-D5766
Tensile
- Newton Applications Software
Analysis: Open-Hole Tensile Strength. DAQ: Synchronous Load/Strain at 100Hz.
Newton Applications Software : N-ASTM-D624
Tear
- Newton Applications Software
Analysis: Tear Strength (Ts). DAQ: 100Hz to capture rapid crack propagation.
Newton Applications Software : N-ASTM-D638
Tensile
- Newton Applications Software
Analysis: Chord Modulus and Poisson’s Ratio. DAQ: 100Hz.
Newton Applications Software : N-ASTM-D6484
Compression
- Newton Applications Software
Analysis: Open-Hole Compressive Strength. DAQ: 100Hz.
Newton Applications Software : N-ASTM-D6641
Compression
- Newton Applications Software
Analysis: Compressive Strength and Percent Bending. DAQ: Biaxial strain at 100Hz.
Newton Applications Software : N-ASTM-D695
Compression
- Newton Applications Software
Analysis: Compressive Yield (0.2%). DAQ: 50Hz. Supports Toe-Compensation.
Newton Applications Software : N-ASTM-D732
Shear
- Newton Applications Software
Analysis: Shear Strength (Force/Periphery Area). DAQ: 100Hz.
Newton Applications Software : N-ASTM-D751
Tensile
- Newton Applications Software
Analysis: Grab and Strip breaking strength. DAQ: 50Hz.
Newton Applications Software : N-ASTM-D790
Flexure
- Newton Applications Software
Analysis: Flexural Strength at 5% strain. DAQ: 50Hz.
Newton Applications Software : N-ASTM-D882
Tensile
- Newton Applications Software
Analysis: Tensile Energy Absorption (TEA) and Modulus. DAQ: High-speed for rapid film snaps.
Newton Applications Software : N-ASTM-D903
Peel
- Newton Applications Software
Analysis: Average Peel Strength over 150 mm. DAQ: 50Hz.