Testing Accessories

Browse our full catalogue of industrial testing accessories. Use the filters to narrow results by test type, sample standard, or force capacity.

138 items found

Newton Applications Software : N-ASTM-E1012
Alignment
- Newton Applications Software
Analysis: Percent Bending and Axial Strain. DAQ: 8 to 12 channels of strain simultaneously.
Newton Applications Software : N-ASTM-E238
Bearing
- Newton Applications Software
Analysis: Bearing Yield Strength (2% of hole diameter). DAQ: 100Hz.
Newton Applications Software : N-ASTM-E466
Fatigue
- Newton Applications Software
Analysis: S−N Curve (Stress vs. Cycles). DAQ: 1kHz to track peak/valley loads over millions of cycles.
Newton Applications Software : N-ASTM-E8 / E8M
Tensile
- Newton Applications Software
Analysis: Upper/Lower Yield, Elongation, and Reduction of Area (Z). DAQ: 500Hz+.
Newton Applications Software : N-ASTM-E9
Compression
- Newton Applications Software
Analysis: Compressive Yield Strength (0.2% offset). DAQ: 100Hz.
Newton Applications Software : N-ASTM-F2256
Peel
- Newton Applications Software
Analysis: T-Peel strength of tissue adhesives (surgical glues). DAQ: Low-force sensitivity (mN range).
Newton Applications Software : N-ASTM-F382
Flexure
- Newton Applications Software
Analysis: Bending stiffness and structural stiffness of bone plates. DAQ: 100Hz.
Newton Applications Software : N-ASTM-F606
Tensile
- Newton Applications Software
Analysis: Proof Load and Wedge Tensile Strength. DAQ: High-load peak capture.
Newton Applications Software : N-ASTM-F88
Peel
- Newton Applications Software
Analysis: Average Seal Strength and Peak Force. DAQ: 200Hz to catch seal tearing vs peeling.
Newton Applications Software : N-DIN-50106
Compression
- Newton Applications Software
Analysis: Compressive Yield (Rdp) and Modulus. DAQ: High-resolution force/displacement.
Newton Applications Software : N-DIN-53504
Tensile
- Newton Applications Software
Analysis: Stress at 100/200/300% elongation and tensile strength. DAQ: 100Hz.
Newton Applications Software : N-EN-14509
Compression / Shear
- Newton Applications Software
Analysis: Core shear and compressive strength of insulated panels. DAQ: 50Hz.
Newton Applications Software : N-EN-1465
Shear
- Newton Applications Software
Analysis: Tensile lap-shear strength. DAQ: Peak load and failure mode logging.
Newton Applications Software : N-EN-196-1
Compression / Flexure
- Newton Applications Software
Analysis: Compressive strength of mortar prisms. DAQ: High-load peak detection.
Newton Applications Software : N-ISO-10113
Tensile
- Newton Applications Software
Analysis: Plastic strain ratio (r-value). DAQ: Simultaneous Axial and Transverse strain.
Newton Applications Software : N-ISO-11040
Force
- Newton Applications Software
Analysis: Break-loose force and Glide force (Plunger). DAQ: 1kHz to catch the plunger snap.
Newton Applications Software : N-ISO-14125
Flexure
- Newton Applications Software
Analysis: Flexural stress/strain and Modulus. DAQ: High-precision center-point deflection.
Newton Applications Software : N-ISO-14126
Compression
- Newton Applications Software
Analysis: Compressive Strength and Modulus. DAQ: Back-to-back strain monitoring.
Newton Applications Software : N-ISO-14129
Shear
- Newton Applications Software
Analysis: In-plane shear stress/strain and Shear Modulus. DAQ: Biaxial strain at 100Hz.
Newton Applications Software : N-ISO-1421
Tensile
- Newton Applications Software
Analysis: Force at break and elongation at break (Strip/Grab methods). DAQ: 50Hz.