ASTM D3574 Test Guide: Compression Testing for Foam
CompressionAlways execute the three required structural pre-flex cycles to 75% deflection before recording official IFD force data.
Testing Applications
Browse validated testing configurations. Filter by regulatory standard, material type, or force requirements.
11 items found
-
-
ASTM D412 Test Guide: Tensile Testing for Elastomers
TensileNever use standard manual screw grips; vulcanized rubber narrows drastically under tension and requires self-adjusting pneumatic jaws.
-
ASTM D429 Test Guide: Peel Testing for Elastomers
PeelMeticulously document the exact failure mode split: R (Rubber Failure), RC (Rubber-Cement), CP (Cement-Primer), or M (Metal Interface).
-
ASTM D575 Test Guide: Compression Testing for Elastomers
CompressionApply a thin, uniform layer of silicone oil or petroleum jelly to platens to minimize interfacial friction coefficients.
-
ASTM D5868 Test Guide: Lap Shear Testing for Composites
ShearAlways insert thickness-matching spacer tabs behind the specimen inside the grips to keep the adhesive bond line perfectly aligned with…
-
ASTM D624 Test Guide: Tear Testing for Elastomers
TearAlways verify the cutting die blades under magnification regularly; a single micro-nick on the blade face creates invalid, low-value specimen…
-
ASTM D7131 Test Guide: Testing for Plastics
CharacterizationMaintain strict temperature equilibrium across the sample clamping framework to isolate material properties from transient thermal errors.
-
ASTM D7791 Test Guide: Fatigue Testing for Plastics
FatigueAlways adjust the cyclic frequency downward if the infrared sensor tracks a surface temperature increase exceeding 2°C over the ambient…
-
ASTM E517 Test Guide: Testing for Metals
FormabilityEnsure the specimen edges are polished completely free of blanking burrs; even minor edge roughness skews the transverse width extensometer…
-
ASTM E643 Test Guide: Formability Testing for Metals
FormabilityAlways apply a standardized, high-pressure grease lubricant uniformly to the punch apex to guarantee pure, friction-free stretch-forming dynamics.
-
ASTM E646 Test Guide: Formability Testing for Metals
FormabilityAlways verify that the linear regression regression coefficient (R^2) exceeds 0.995; a lower value indicates invalid data collection or localized…