Testing Machines

Browse our comprehensive range of testing machines. Filter by Newton Tier, machine type, or drive type to find the exact hardware configuration you need.

63 items found

MTO 100-100-10 Single Column UTM

Optimized for the sub-kN range, these units feature high-resolution encoders (up to 0.1 micron) to capture the minute displacement events…
MTO 100-1000-6 Single Column UTM

Maximizes single-column frame envelope via a reinforced backing strut to tolerate higher loads.
MTO 100-250-12 Single Column UTM

Engineered for clinical validation environments requiring low frame deflection and exceptional data acquisition.
MTO 100-250-6 Single Column UTM

Space-constrained configuration reduces active column height while maintaining full high-speed controller logic.
MTO 100-500-6 Single Column UTM

Over-built construction minimizes load frame compliance during high-load insertion/extraction profiles.
MTO 110-1125-18 Cantilever UTM

The C-Type cantilever design provides 360-degree access to the test area, making it the ideal choice for testing oversized components…
MTO 110-250-12 Cantilever UTM

Eliminates accessibility limitations for rapid loading of awkward physical configurations.
MTO 110-500-12 Cantilever UTM

Structural geometry is engineered to minimize load frame compliance and maximize test space.
MTO 120-250-12 Dual Column UTM

Dual-column load frame layouts provide a balanced, symmetric stress distribution axis to prevent off-center side-loads from biasing low-force mechanical tracking.
MTO 120-250-6 Dual Column UTM

Dual column design increases lateral frame structural spring rates, maximizing true specimen deformation during spring rate testing.
MTO 120-500-6 Dual Column UTM

Axial deviation is minimized in a dual-post configuration, preserving true parallel alignment during severe yield stress compression tests.
MTO 140-1125-6 Dual Column UTM

QC vs. R&D Testing: Well suited for routine quality control, these units are our most affordable systems. For critical data,…
MTO 140-2250-6 Dual Column UTM

Industrial Fastener QC: Cost-effective 10 kN platform for repetitive tensile strength verification in manufacturing environments.
MTO 150-1000-6 Horizontal UTM

Horizontal testing (Series 150) is an alternative to the vertical setup of more common load frames.
MTO 150-250-12 Horizontal UTM

Horizontal frame footprints resolve mechanical errors caused by more common vertical test machines.
MTO 150-250-6 Horizontal UTM

Horizontal frame footprints resolve mechanical errors caused by more common vertical test machines.
MTO 150-500-6 Horizontal UTM

Horizontal actuator layouts allow complete immersion baths or real-world mounting angles to mimic operational fluid environments.
MTO 240-100-940 Single Column UTM

Optimized for the sub-kN range, these units feature high-resolution encoders (up to 0.0001 mm) to capture the minute displacement events…
MTO 240-1125-1040 Single Column UTM

High-Travel Testing: Single-column frames with up to 1400 mm travel for high-elongation medical polymers and delicate textile fibers.
MTO 240-250-1040 Single Column UTM

High-Travel Testing: Single-column frames with up to 1400 mm travel for high-elongation medical polymers and delicate textile fibers.