ASTM C1184 Test Guide: Tensile Testing for Adhesives
TensileClean and prime the substrate blocks precisely according to the manufacturer’s spec to isolate true sealant engineering limits.
Testing Applications
Browse validated testing configurations. Filter by regulatory standard, material type, or force requirements.
10 items found
-
-
ASTM D1002 Test Guide: Lap Shear Testing for Adhesives
ShearAlways insert spacer shims equal to the coupon thickness into the grips to guarantee a perfectly straight axial line of…
-
ASTM D2979 Test Guide: Peel Testing for Adhesives
PeelClean the stainless steel probe tip with reagent-grade toluene or isopropyl alcohol and a lint-free wipe before every single stroke.
-
ASTM D3163 Test Guide: Shear Testing for Adhesives
ShearAlways insert thickness-matching spacers into the grip jaws behind the specimen tabs to keep the bond line perfectly collinear with…
-
ASTM D3165 Test Guide: Shear Testing for Adhesives
ShearMeasure notch separation distance with an optical micrometer to the nearest 0.05mm to secure perfect shear area parameters.
-
ASTM D3528 Test Guide: Peel Testing for Adhesives
ShearVerify that the two lap joints are identical in surface area and bond line thickness to protect the mechanical symmetry…
-
ASTM D4501 Test Guide: Shear Testing for Adhesives
ShearEnsure the shearing tool blade rests perfectly flat against the step edge and is collinear with the bond line plane…
-
ASTM D5868 Test Guide: Lap Shear Testing for Composites
ShearAlways insert thickness-matching spacer tabs behind the specimen inside the grips to keep the adhesive bond line perfectly aligned with…
-
ASTM D6195 Test Guide: Loop Tack Testing for Adhesives
Loop TackClean the stainless steel reference plate with reagent-grade isopropyl alcohol or n-heptane and a lint-free cloth before every single loop…
-
ASTM D903 Test Guide: Peel Testing for Adhesives
PeelAlways discard the first 25mm of peeling data from calculations; adhesive failure must reach steady-state equilibrium before capturing valid averages.