ASTM B571 Test Guide: Peel Testing for Metals
PeelGrind the chisel edge to the exact specified angle and sharpen regularly to maintain uniform shear force application.
Testing Applications
Browse validated testing configurations. Filter by regulatory standard, material type, or force requirements.
9 items found
-
-
ASTM D1000 Test Guide: Peel Testing for Tape
PeelAlways roll the tape onto the steel plate with a standardized mechanical roller at a uniform speed to eliminate manual…
-
ASTM D2979 Test Guide: Peel Testing for Adhesives
PeelClean the stainless steel probe tip with reagent-grade toluene or isopropyl alcohol and a lint-free wipe before every single stroke.
-
ASTM D3330 Test Guide: Peel Testing for Tape
PeelMeticulously clean the stainless steel test plate with diacetone alcohol or n-heptane and a lint-free wipe before every single strip…
-
ASTM D429 Test Guide: Peel Testing for Elastomers
PeelMeticulously document the exact failure mode split: R (Rubber Failure), RC (Rubber-Cement), CP (Cement-Primer), or M (Metal Interface).
-
ASTM D903 Test Guide: Peel Testing for Adhesives
PeelAlways discard the first 25mm of peeling data from calculations; adhesive failure must reach steady-state equilibrium before capturing valid averages.
-
ASTM E517 Test Guide: Testing for Metals
FormabilityEnsure the specimen edges are polished completely free of blanking burrs; even minor edge roughness skews the transverse width extensometer…
-
ASTM E643 Test Guide: Formability Testing for Metals
FormabilityAlways apply a standardized, high-pressure grease lubricant uniformly to the punch apex to guarantee pure, friction-free stretch-forming dynamics.
-
ASTM E646 Test Guide: Formability Testing for Metals
FormabilityAlways verify that the linear regression regression coefficient (R^2) exceeds 0.995; a lower value indicates invalid data collection or localized…